Question

• Introduction
• Building the drivers using configure
• Building the plugins manually
  • QMYSQL3 - MySQL 3.x
    • General information
    • How to build the plugin on Unix/Linux
    • How to build the plugin on Windows
  • QOCI8 - Oracle Call Interface (OCI)
    • General information
    • Unicode support
    • BLOB/LOB support
    • How to build the plugin on Unix/Linux
    • How to build the plugin on Windows
  • QODBC3 - Open Database Connectivity (ODBC)
    • General information
    • How to build the plugin on Unix/Linux
    • How to build the plugin on Windows
  • QPSQL7 - PostgreSQL version 6 and 7
    • General information
    • Unicode support
    • BLOB support
    • How to build the plugin on Unix/Linux
  • QTDS7 - Sybase Adaptive Server and Microsoft SQL Server
    • How to build the plugin on Unix/Linux
    • How to build the plugin on Windows
• Troubleshooting
• How to write your own database driver

Introduction

The SQL Module uses driver plugins in order to communicate with different database APIs.
Since the SQL Module API is database-independent, all
database-specific code is contained within these drivers. Several
drivers are supplied with Qt and other drivers can be added. The
driver source code is supplied and can be used as a model for writing your own drivers.

To build a driver plugin you need the client API that is shipped with
every Database Management System (DBMS). Most installation programs
also allow you to install "development libraries", and these are what
you need. These libraries are responsible for the low-level
communication with the DBMS.

The currently available drivers shipped with Qt are:

• QMYSQL3 - MySQL Driver
• QOCI8 - Oracle Call Interface Driver, version 8 and 9
• QODBC3 - Open Database Connectivity Driver
• QPSQL7 - PostgreSQL v6.x and v7.x Driver
• QTDS7 - Sybase Adaptive Server and Microsoft SQL Server Driver

Note that not all of the plugins are shipped with the Qt Free Edition
due to license incompatibilities with the GPL.

Building the drivers using configure

The Qt configure script automatically detects the available client
libraries on your machine. Run "configure -help" to see what drivers
may be built. You should get an output similar to this:

Possible values for <driver>: [ mysql oci odbc psql tds ]
Auto-Detected on this system: [ mysql psql ]

Note that on Windows, the configure script doesn't currently do any
auto-detection.

Note that configure cannot detect the neccessary libraries and include
files if they are not in the standard paths, so it may be necessary to
specify these paths using the "-I" and "-L" switches. If your MySQL
include files are installed in /usr/local/mysql (or in C:\mysql\include
on Windows), then pass the following parameter to configure:
"-I/usr/local/mysql" (or "-I C:\mysql\include" for Windows).

Note that on Windows the parameter -I doesn't allow spaces in filenames,
so use the 8.3 name instead, i.e. use "C:\progra~1\mysql" instead of
"C:\program files\mysql".

Use the -qt-sql-<driver> parameter to build the database driver statically
into your Qt library or -plugin-sql-<driver> to build the driver as a
plugin. Look at the chapters below for additional information about required
libraries.

Building the plugins manually

QMYSQL3 - MySQL 3.x

General information

MySQL 3.x doesn't support SQL transactions by default. There are some
backends which offer this functionality. Recent versions of the MySQL
client libraries (>3.23.34) allow you to use transactions on those
modified servers.

If you have a recent client library and connect to a transaction-enabled MySQL
server, a call to the QSqlDriver::hasFeature( QSqlDriver::Transactions )
function returns TRUE and SQL transactions can be used.

You can find information about MySQL on http://www.mysql.com

How to build the plugin on Unix/Linux

You need the MySQL header files and as well as the shared library
"libmysqlclient.so". Depending on your Linux distribution you need to
install a package which is usually called "mysql-devel".

Tell qmake where to find the MySQL header files and shared libraries
(here it is assumed that MySQL is installed in /usr/local) and run make:

cd $QTDIR/plugins/src/sqldrivers/mysql
qmake -o Makefile "INCLUDEPATH+=/usr/local/include" "LIBS+=-L/usr/local/lib -lmysqlclient" mysql.pro
make

How to build the plugin on Windows

You need to get the MySQL installation files. Run SETUP.EXE and
choose "Custom Install". Install the "Libs & Include Files" Module.
Build the plugin as follows (here it is assumed that MySQL is
installed in C:\MYSQL):

cd %QTDIR%\plugins\src\sqldrivers\mysql
qmake -o Makefile "INCLUDEPATH+=C:\MYSQL\INCLUDE" "LIBS+=C:\MYSQL\LIB\OPT\LIBMYSQL.LIB" mysql.pro
nmake

If you are not using a Microsoft compiler, replace "nmake" with "make" in the
statement above.

QOCI8 - Oracle Call Interface (OCI)

General information

The Qt OCI plugin supports both Oracle 8 and Oracle 9. After
connecting to the Oracle server, the plugin will auto-detect the
database version and enable features accordingly.

Unicode support

If the Oracle server supports Unicode, the OCI plugin will use UTF-8
encoding to communicate with the server. When accessing an Oracle 8
database, only retrieval of Unicode strings are supported. For Oracle
9 both retrieval and insertion of Unicode strings are supported.

BLOB/LOB support

Binary Large Objects (BLOBs) can be retrieved, but be aware that this
process may require a lot of memory. We recommend using separate
queries and retrieving only one BLOB at a time.

Inserting BLOB fields is limited to Oracle's maximum SQL string size.

How to build the plugin on Unix/Linux

All files required to build driver should ship with the standard Oracle
Client install.

Oracle library files required to build driver:

• libclntsh.so
• libclntsh.so.8.0 (Oracle 8) or libclntsh.so.9.0 (Oracle 9)
• libwtc8.so or libwtc9.so

Tell qmake where to find the Oracle header files and shared libraries
(it is assumed that the variable $ORACLE_HOME points to the directory
where Oracle is installed) and run make:

If you are using Oracle 8:

cd $QTDIR/plugins/src/sqldrivers/oci
qmake -o Makefile "INCLUDEPATH+=$ORACLE_HOME/rdbms/public $ORACLE_HOME/rdbms/demo" "LIBS+=-L$ORACLE_HOME/lib -lclntsh -lwtc8" oci.pro
make

For Oracle version 9:

cd $QTDIR/plugins/src/sqldrivers/oci
qmake -o Makefile "INCLUDEPATH+=$ORACLE_HOME/rdbms/public $ORACLE_HOME/rdbms/demo" "LIBS+=-L$ORACLE_HOME/lib -lclntsh -lwtc9" oci.pro
make

How to build the plugin on Windows

Choosing the option "Programmer" in the Oracle Client Installer from
the Oracle Client Installation CD is sufficient to build the plugin.

Build the plugin as follows (here it is assumed that Oracle Client is
installed in C:\oracle):

set INCLUDE=%INCLUDE%;c:\oracle\oci\include
set LIB=%LIB%;c:\oracle\oci\lib\msvc
cd %QTDIR%\plugins\src\sqldrivers\oci
qmake -o Makefile oci.pro
nmake

When you run your application you will also need to add the oci.dll
path to your PATH environment variable:

set PATH=%PATH%;c:\oracle\bin

If you are not using a Microsoft compiler, replace "nmake" with "make"
in the statement above.

QODBC3 - Open Database Connectivity (ODBC)

General information

ODBC is a general interface that allows you to connect to multiple
DBMS using a common interface. The QODBC3 driver allows you to connect
to an ODBC driver manager and access the available data sources. Note
that you also need to install and configure ODBC drivers for the ODBC
driver manager that is installed on your system. The QODBC3 plugin
then allows you to use these data sources in your Qt project.

On Windows systems after 95 an ODBC driver manager should be installed
by default, for Unix systems there are some implementations which have to
be installed first. Note that every client that uses your application
is required to have an ODBC driver manager installed, otherwise the
QODBC3 plugin will not work.

Be aware that when connecting to an ODBC datasource you must pass in
the name of the ODBC datasource to the QSqlDatabase::setDatabaseName()
function - not the actual database name.

The QODBC3 Plugin needs an ODBC compliant driver manager version 2.0 or
greater to work. Some ODBC drivers claim to be version 2.0 compliant,
but do not offer all needed functionality. The QODBC3 plugin therefore
checks whether the data source can be used after a connection has been
established and refuses to work if the check fails. If you don't
like this behaviour, you can remove the #define ODBC_CHECK_DRIVER
line from the file qsql_odbc.cpp. Do this at your own risk!

Note that some DBMSs, like Microsoft Access, does not return the
primary index for a table through ODBC. You can still use the QODBC3
driver, but you will have to manage table indices yourself (through
QSqlCursor::setPrimaryIndex()), otherwise INSERT, UPDATE and DELETE
operations will fail in data-aware Qt widgets. You will have to
comment out the #define ODBC_CHECK_DRIVER line and recompile the
driver, otherwise you will not be able to connect to a Microsoft
Access database.

How to build the plugin on Unix/Linux

It is recommended that you use unixODBC. You can find the newest
version and ODBC drivers at http://www.unixodbc.org.
You need the unixODBC header files and shared libraries.

Tell qmake where to find the unixODBC header files and shared libraries
(here it is assumed that unixODBC is installed in /usr/local/unixODBC)
and run make:

cd $QTDIR/plugins/src/sqldrivers/odbc
qmake "INCLUDEPATH+=/usr/local/unixODBC/include" "LIBS+=-L/usr/local/unixODBC/lib -lodbc"
make

How to build the plugin on Windows

The ODBC header and include files should already be installed in the
right directories. You just have to build the plugin as follows:

cd %QTDIR%\plugins\src\sqldrivers\odbc
qmake -o Makefile odbc.pro
nmake

If you are not using a Microsoft compiler, replace "nmake" with "make" in the
statement above.

QPSQL7 - PostgreSQL version 6 and 7

General information

The QPSQL7 driver supports both version 6 and 7 of PostgreSQL. We
recommend compiling the plugin with a recent version of the PostgreSQL
Client API (libpq) because it is more stable and still downward
compatible.

If you want to link the plugin against the libpq shipped with version
6 we recomment a recent version like PostgreSQL 6.5.3, otherwise a
connection to a version 7 server may not work.

The driver auto-detects the server version of PostgreSQL after a
connection was successful. If the server is too old or the version
information cannot be determined a warning is issued.

For more information about PostgreSQL visit http://www.postgresql.org.

Unicode support

The QPSQL7 driver automatically detects whether the PostgreSQL
database you are connecting to supports Unicode or not. Unicode is
automatically used if the server supports it. Note that the driver
only supports the UTF-8 encoding. If your database uses any other
encoding, the server has to be compiled with Unicode conversion
support.

Unicode support was introduced in PostgreSQL version 7.1 and it will
only work if both the server and the client library have been compiled
with multibyte support. More information about how to set up a
multibyte enabled PostgreSQL server can be found in the PostgreSQL
Administrator Guide, Chapter 5.

BLOB support

Binary Large Objects can be fetched but not inserted. Please use the
PostgreSQL command lo_import to insert binary data into the database.

How to build the plugin on Unix/Linux

Just installing "libpq.so" and the corresponding header files is
unfortunately not sufficient. You have to get the whole source
distribution and run the configure script once (there is no need to
build it if you have already installed a binary distribution).

Tell qmake where to find the PostgreSQL header files and shared
libraries (here it is assumed that you extracted the PostgreSQL source
code in /usr/src/psql and the shared library is installed in /usr/lib)
and run make:

cd $QTDIR/plugins/src/sqldrivers/psql
qmake -o Makefile "INCLUDEPATH+=/usr/src/psql/src/include /usr/src/psql/src/interfaces/libpq" "LIBS+=-L/usr/lib -lpq" psql.pro
make

QTDS7 - Sybase Adaptive Server and Microsoft SQL Server

How to build the plugin on Unix/Linux

Under Unix, two libraries are available which support the TDS protocol:

- FreeTDS, a free implementation of the TDS protocol ( http://www.freetds.org ).
Note that FreeTDS is not yet stable, so some functionality may not work
as expected.

- Sybase Open Client, available from http://www.sybase.com
Note for Linux users: Get the Open Client RPM from http://linux.sybase.com

Regardless of which library you use, the shared object file
"libsybdb.so" is needed. Set the SYBASE environment variable to point
to the directory where you installed the client library and execute
qmake:

cd $QTDIR/plugins/src/sqldrivers/tds
qmake -o Makefile "INCLUDEPATH=$SYBASE/include" "LIBS=-L$SYBASE/lib -lsybdb"
make

How to build the plugin on Windows

You can either use the DB-Library supplied by Microsoft or the Sybase Open Client
( http://www.sybase.com ). You have to include NTWDBLIB.LIB
to build the plugin:

cd %QTDIR%\plugins\src\sqldrivers\tds
qmake -o Makefile "LIBS+=NTWDBLIB.LIB" tds.pro
nmake

By default the Microsoft library is used on Windows, if you want to force
the use of the Sybase Open Client, you have to define
Q_USE_SYBASE in %QTDIR%\src\sql\drivers\tds\qsql_tds.cpp.

Troubleshooting

You should always use client libraries that have been compiled with
the same compiler as you are using for your project. If you cannot get
a source distibution to compile the client libraries yourself, you
have to make sure that the pre-compiled library is compatible with
your compiler, otherwise you will get a lot of "undefined symbols"
errors. Some compilers have tools to convert libraries, e.g. Borland
ships the tool COFF2OMF.EXE to convert libraries that have been
generated with Microsoft Visual C++.

If the compilation of a plugin succeeds but it cannot be loaded,
make sure that the following requirements are met:

• Make sure you are using a shared Qt library, you cannot use the
  plugins with a static build.

• Make sure that the environment variable QTDIR points to the right
  directory. Go to the $QTDIR/plugins/sqldrivers directory and make sure
  that the plugin exists in that directory.

• Make sure that the client libraries of the DBMS are available on the
  system. On Unix, run the command ldd and pass the name of the
  plugin as parameter, for example ldd libqsqlmysql.so. You will
  get a warning if any of the client libraries couldn't be found.
  On Windows, you can use the dependency walker of Visual Studio.

How to write your own database driver

QSqlDatabase is responsible for loading and managing database driver
plugins. When a database is added (see QSqlDatabase::addDatabase()),
the appropriate driver plugin is loaded (using QSqlDriverPlugin).
QSqlDatabase relies on the driver plugin to provide interfaces for
QSqlDriver and QSqlResult.

QSqlDriver is an abstract base class which defines the functionality
of a SQL database driver. This includes functions such as
QSqlDriver::open() and QSqlDriver::close(). QSqlDriver is responsible
for connecting to a database, establish the proper environment, etc.
In addition, QSqlDriver can create QSqlQuery objects appropriate for
the particular database API. QSqlDatabase forwards many of its
function calls directly to QSqlDriver which provides the concrete
implementation.

QSqlResult is an abstract base class which defines the functionality
of a SQL database query. This includes statements such as SELECT,
UPDATE, or ALTER TABLE. QSqlResult contains functions such as
QSqlResult::next() and QSqlResult::value(). QSqlResult is responsible
for sending queries to the database, returning result data, etc.
QSqlQuery forwards many of its function calls directly to QSqlResult
which provides the concrete implementation.

QSqlDriver and QSqlResult are closely connected. When implementing a
Qt SQL driver, both of these classes must to be subclassed and the
abstract virtual methods in each class must be implemented.

To implement a Qt SQL driver as a plugin (so that it is recognized and
loaded by the Qt library at runtime), the driver must use the
Q_EXPORT_PLUGIN macro. Please read the Qt
Plugin documentation for more information on this. You can
also check out how this is done in the SQL plugins that is provided
with Qt in QTDIR/plugins/src/sqldrivers and QTDIR/src/sql/drivers.