Flipper 调试器错误无法启动 Flipper-server
这是我第一次尝试使用 Flipper 调试器，但它似乎没有启动。它引发了错误
无法启动 Flipper-server 错误：无法在端口启动服务器 9088 由于 {“code”：“EACCES”，“errno”：“EACCES”，“syscall”：“监听”，“地址”：“0.0.0.0”，“端口”：9088，“名称”：“错误”，”消息":"听 EACCES: 权限被拒绝 0.0.0.0:9088","stack":"错误: 监听 EACCES: Server.setupListenHandle 处的权限被拒绝 0.0.0.0:9088\n [as _listen2] (net.js:1296:21)\n 在listenInCluster (net.js:1361:12)\n 在Server.listen (net.js:1447:7)\n 在S (文件:///D:/Program%20Files/Flipper-win/resources/app.asar/bundle.js:104:857)\n 在新的 Promise ()\n 在 SecureServerWebSocket.start 处 (文件:///D:/Program%20Files/Flipper-win/resources/app.asar/bundle.js:104:538)\n 在创建服务器 (文件:///D:/Program%20Files/Flipper-win/resources/app.asar/bundle.js:30:679)\n 在 ServerController.init 处 (文件:///D:/Program%20Files/Flipper-win/resources/app.asar/bundle.js:7:1715)\n 在异步 FlipperServerImpl.connect (文件:///D:/Program%20Files/Flipper-win/resources/app.asar/bundle.js:6:7506)\n 异步启动时 (file:///D:/Program%20Files/Flipper-win/resources/app.asar/bundle.js:3:1501)"}
在我的 App Inspect 中，它也没有显示任何设备，所以我猜测是由于上述错误还是其他原因？因为我已连接物理设备并运行 adb devices 在列表中显示该设备
。 是否也需要。
警告。不确定这 net/6B7Wf.png" alt="在此处输入图像描述">
我在 Windows V0.136.0 上使用 Flipper 桌面
It is my first attempt to use the flipper debugger but it doesn't seem to be starting. It threw error
Failed to start flipper-server Error: Unable to start server at port
9088 due to
{"code":"EACCES","errno":"EACCES","syscall":"listen","address":"0.0.0.0","port":9088,"name":"Error","message":"listen
EACCES: permission denied 0.0.0.0:9088","stack":"Error: listen EACCES:
permission denied 0.0.0.0:9088\n at Server.setupListenHandle [as
_listen2] (net.js:1296:21)\n at listenInCluster (net.js:1361:12)\n at Server.listen (net.js:1447:7)\n at S
(file:///D:/Program%20Files/Flipper-win/resources/app.asar/bundle.js:104:857)\n
at new Promise ()\n at SecureServerWebSocket.start
(file:///D:/Program%20Files/Flipper-win/resources/app.asar/bundle.js:104:538)\n
at createServer
(file:///D:/Program%20Files/Flipper-win/resources/app.asar/bundle.js:30:679)\n
at ServerController.init
(file:///D:/Program%20Files/Flipper-win/resources/app.asar/bundle.js:7:1715)\n
at async FlipperServerImpl.connect
(file:///D:/Program%20Files/Flipper-win/resources/app.asar/bundle.js:6:7506)\n
at async start
(file:///D:/Program%20Files/Flipper-win/resources/app.asar/bundle.js:3:1501)"}
In my App Inspect, it doesn't show any devices too so I'm guessing it's because of the error above or it's something else? Cause I have my physical device connected to it and running adb devices shows the device in the listing.
And in the Setup Doctor section, it gave the warning. Not sure if this is something needed too.
I'm using flipper desktop on windows V0.136.0
如果你对这篇内容有疑问，欢迎到本站社区发帖提问 参与讨论，获取更多帮助，或者扫码二维码加入 Web 技术交流群。
绑定邮箱获取回复消息
由于您还没有绑定你的真实邮箱，如果其他用户或者作者回复了您的评论，将不能在第一时间通知您！
发布评论
评论（1）
我遇到了同样的问题，但端口不同。原来我的端口被windows排除了。要检查您的端口 9088 是否被排除，请以管理员身份打开 cmd，然后运行此命令，
如果您的端口在列表中，您可以通过运行
检查协议 tcp 和端口号来知道哪个应用程序正在保留该端口，当您看到行，检查进程 ID，然后以管理员身份打开任务管理器并转到详细信息选项卡并比较进程 ID（PID），您应该知道哪个应用程序正在保留此端口。
我无法取消保留我的端口，因为它是由系统进程保留的，并且我每次都收到访问被拒绝的消息。
您可以使用不同的端口启动 Flipper，请检查 flipper 自定义端口
我的情况是
在 Windows 中
i was having the same problem, but with a different port. it turned out that my port was excluded by windows. to check if your port 9088 is excluded, open cmd as administrator, and run this command
if your port was in the list, you can know which application is reserving this port by running
check for protocol tcp and the port number, when you see the row, check the process id, then open task manager as administrator and go to details tab and compare the process id(PID) you should know which application is reserving this port.
i wasn't able to unreserve my port because it was reserved by system process, and i got access denied message every time.
you can launch flipper with different port, check flipper custom port
my case was
in windows will be