2.6.14.1内核启动问题

Question

新手求助：我用的内核是2.6.14.1，在vivi下启动时出现
VIVI version 0.1.4 (root@localhost.localdomain) (gcc version 2.95.3 20010315 (re
lease)) #0.1.4 Sat Apr 1 12:42:15 EST 2006
MMU table base address = 0x33DFC000
Succeed memory mapping.
+---------------------------------------------+
| S3C2410X USB Downloader ver R1.11 SEP/03/02 |
+---------------------------------------------+
FCLK=200MHz,DMA mode
USB: IN_ENDPOINT:1 OUT_ENDPOINT:3
FORMAT: <ADDR(DATA):4>+<SIZE(n+10):4>+<DATA:n>+<CS:2>
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung K9D1208V0M)
Could not found stored vivi parameters. Use default vivi parameters.
Press Return to start the LINUX now, any other key for vivi
Copy linux kernel from 0x00030000 to 0x30008000, size = 0x00100000 ... done
zImage magic = 0x016f2818
Setup linux parameters at 0x30000100
linux command line is: "noinitrd root=/dev/mtdblock/0 init=/linuxrc console=ttyS
0"
MACH_TYPE = 193
NOW, Booting Linux......
Uncompressing Linux............................................................
done, booting the kernel.
就不动了，我看以前的帖子说要把console=ttyS0
改为：
console=ttySAC0
可是我不知道在哪里改或用什么命令改，求求大家帮帮我，小生有礼了！

Answer 1

make menuconfig

在boot options 里面　console=ttySAC0,115200